• cp-e Ford Fusion Sport/MKZ 2.7 Front Mount Intercooler

cp-e Ford Fusion Sport/MKZ 2.7 Front Mount Intercooler

Fits: 2017+ Fusion Sport/MKZ 2.7/3.0 V6 EcoBoost

Note: Not compatible with adaptive cruise control module

Fusion Sport FMIC

After months of engineering and development, cp-e™ is proud to release the ΔCore Ford Fusion Sport FMIC. The stock intercooler does an excellent job for the everyday driver that doesn’t want to modify their car. However, once you find that itch to go faster, the intercooler is a must have modification.

Fusion Sport FMIC Features

  • 29″ x 5.5″ x 6″ core size
  • Low Turbulence End Tank Design
  • Minimal Pressure Drop
  • Maximized Core Design
  • Substantially Lower & More Consistent Charge Temps
  • Bolt-in Design, No Vehicle Modification Needed
  • Fully Cast End-Tanks
  • CNC cut and bent brackets
  • Gain of 28whp and 25ft lbs in high RPM’s due to lack of heatsoak.

cp-e™ started off by determining the maximum size core that could fit without major modification to the vehicle. Our Ford Fusion Sport FMIC uses the bar and plate design to help ensure a high level of efficiency.

cp-e™ then set their sights on designing the perfect Ford Fusion Sport FMIC endtanks, developing a design that not only encloses the monstrous core, but also requires no cutting, no drilling, and no permanent modification to the vehicle. With the laser cut brackets, the intercooler will mount in the stock location while matching up to the stock intercooler piping. Customers can now upgrade their piping when their power demands need it and modify in smaller increments.

As always, the cp-e™ intercooler includes cast endtanks that are welded and pressure tested with the core. What sets these endtanks from the rest is the engineering behind their shape and internal design. Hours of design and computer flow diagrams have been put into the tanks’ design to virtually eliminate turbulence within them. Many times, upgrading an intercooler causes increased turbo-lag, and an overall pressure loss. This is because of the large size of the core and the turbulence within the endtanks. By designing the endtanks to be smaller, and more efficient cp-e™ has found a way to minimize turbulence in order to keep the drivability of the car high, while still enlarging the intercooler drastically.

The internal design of the endtanks directs the air to bring the most optimal airflow as well as an even distribution throughout the core. In intercoolers, the back half of the core only does 25% of the cooling. The endtanks have been designed to direct the air properly into the core for the most even cooling, giving the vehicle the most consistent conditions going into the engine.

Ford Fusion Sport FMIC Highlights

Fully Optimized Core Size

Fully Optimized Core Size

In order to build one of the most efficient intercooler designs possible, cp-e set out to make the largest core available. To accomplish this, we’ve maximized every single square inch of usable space behind the bumper. This is evident in the core design with recesses for a perfect fit, yet largest size physically possible without permanent modification to the vehicle.

Write a review

Please login or register to review

cp-e Ford Fusion Sport/MKZ 2.7 Front Mount Intercooler

  • Product Code: FDCK00010T
  • Reward Points: 930
  • Availability: In Stock
  • $929.99

  • Price in reward points: 18600

Related Products

EcoPower Fusion/MKZ V6 EcoBoost Charge Pipes

EcoPower Fusion/MKZ V6 EcoBoost Charge Pipes

"2017+ Ford Fusion Sport 2.7L Charge Pipes These pipes, silicone hoses and clamps replace th..

$549.99

Turbosmart 1.5/2.0/2.7/3.0 Kompact EM BOV VR2

Turbosmart 1.5/2.0/2.7/3.0 Kompact EM BOV VR2

The award-winning Kompact EM series Blow-Off Valves, are the world’s first truly plug and play..

$242.99

EcoPower Fusion/MKZ V6 EcoBoost Intake Pipes

EcoPower Fusion/MKZ V6 EcoBoost Intake Pipes

"2017+ Ford Fusion Sport 2.7L Intake Pipes will work with the stock intake or any aftermarket i..

$349.99

Steeda 13+ 1.6/2.0 EcoBoost Front Mount Intercooler

Steeda 13+ 1.6/2.0 EcoBoost Front Mount Intercooler

"Fusion enthusiasts rejoice! Steeda has released their new modular design intercooler for 1.6L ..

$729.99

Boomba Fusion/MKZ 1.6/1.5/2.0/2.7/3.0 Ecoboost  Blow Off Valve Adapter

Boomba Fusion/MKZ 1.6/1.5/2.0/2.7/3.0 Ecoboost Blow Off Valve Adapter

"This high performance adapter mounts between the OEM bypass valve/solenoid and the stock turbo..

$89.99

Tags: cp-e, Ford, Fusion, Sport, MKZ, 2.7, Front, Mount, Intercooler